Seagate Drive Not Mounting Mac

Reformat Seagate External Hard Drive. How to Reformat Seagate Drive on Mac: Step 1. Connect the Seagate external hard drive to a Mac. And you can locate the device from the Desktop. Open Disk Utility. Choose the Finder icon Click Applications from the left menu Select Utilities Locate Disk Utility and click to run. Try a SMC Reset - a glitch in the controller is normally the cause of the symptoms you describe: Shut down the computer. Plug in the MagSafe power adapter to a power source and to your computer. On the built-in keyboard, press the (left side) Shift, Control, and Option keys and the power button at the same time.

  1. Seagate External Hard Drive Not Working
  2. Seagate Drive Not Mounting Mac Pro
  3. Seagate Not Working On Mac
  4. Seagate Not Showing Up Windows 10
  5. Seagate Criptografia Problemas Hd Mac
  6. Seagate Drive Not Mounting Mac Hard Drive

Hey Everyone,

Oct 28, 2021 Sometimes, the Seagate Backup Plus drive won't mount on Mac is due to the bad USB port or cable. Thus, once the Seagate Backup Plus drive stops working, you can first do some routine checks as below. Check if the cable of the Seagate Backup Plus drive is connected properly to your Mac. Apr 07, 2021 Reasons Seagate External Hard Drive Isn’t Showing Up on Mac. Seagate External hard drive not detected or recognized is a common problem. At times, you will find the external hard drive option greyed out in Disk Utility. There can be various reasons for this problem. Now, let’s find out about the probable causes of this issue. Seagate external hard drive not showing up Mac: Hi. I have a 1TB Seagate Backup Plus external hard drive, and it won’t show up in my Mac Pro. The Mac Pro is the 2006 Intel Xeon model running 10.6.8 Snow Leopard. The System requirements for the external HDD are snow leopard or higher, so I don't know why it isn't working.

I have a relatively new Seagate Backup Plus 2TB External Drive that I have been moving files to for the last couple of weeks. I am using a 13' MacBook Air (2017) running 10.13.3, and it has been recently updated. I was transferring files when the drive warning came up about removing the drive without properly ejecting it. I unplugged the drive and plugged it back in. The drive showed up in Finder and I tried to open it, but it caused Finder to crash. I unplugged the drive and relaunched Finder and started again.

Unfortunately the drive won't even show up in disk utility (already configured to show all devices). I have tested the drive cable with another drive and everything is fine, the other drive mounts perfectly. I tried to plug in the Seagate again and it just sits and beeps periodically. I have installed the Seagate driver that was recommended and even played with the Paragon software. Nada...

I have to ge this drive running because I was in the process of reorganizing drives and there are files on that drive that I need and haven't backed up yet. Any assistance would be appreciated.

Posted on Feb 22, 2018 2:47 PM

Summary:This article will show you 8 solutions to troubleshoot the external hard drive not mounting in macOS Big Sur/Catalina/Mojave error and how to recover lost data from unmountable external hard drives with iBoysoft Mac Data Recovery.

By Eileen Posted to Home > Mac Data Recovery Tips, updated on May 11th, 2021

Normally, when you plug in an external hard drive to Macs, you'll see it mounted on the desktop, in Finder and in Disk Utility. Then you can read, edit, copy and delete files on the mounted external hard drive. However, if you areunable to mount external hard drives or it reminds you with the ' error' message, you cannot access your important data on this drive at all. The worst thing is that you don't even have any data backup when your external hard drive is unmountable. But now you can ease your mind, in this page, you will see 8 feasible solutions that you can try to make the external hard drive mounted in macOS Catalina/Mojave/High Sierra/Sierra.

Table of contents
1. How to recover lost data if Mac won't boot after Mojave update?
2. Read more about Mounting a disk

How to fix external hard drive not mounting in macOS Catalina/Mojave issue?

Solution 1: Check if the hard drive is properly plugged in.

Since the connection between your Mac and external hard drives relies on cables, loose connections could be the cause that your external hard drive is not recognized by your Mac computer.


If the unstable connection is the case, your external hard drive would not be mounted even with a slight disturbance. Sometimes the cable itself will become hot because of a faulty connection. Therefore, you need to make sure that the connection, i.e. the USB cable, is in good condition.

Solution 2: Check if the USB port/USB hub is unmatchable, damaged or lack of power.

If your external hard drive or USB flash drive is not mounted on Mac, try plugging it into another USB port or a USB hub. That's because there're USB 3.0 and USB 2.0 ports and they have some differences: USB 3.0 has higher transfer rates, provides more power, more bandwidth, etc. than USB 2.0. As you can see, insufficient power supply or damaged USB ports could also lead to external hard drives not mounting in macOS Catalina/Mojave/High Sierra.

To check this error, you can unplug the problematic external hard drive and plug a functional external hard drive into this USB port to see if it can be mounted normally.

Solution 3: Check if your Mac is set to show mounted drives on the desktop.

It's also possible that your Mac has alreadyrecognized the external hard drive butnot showing up on Mac desktop or Finder. Under such circumstance, you should go to Finder > Preferences > General and make sure the 'External disks' option is ticked. Then you'll see the external hard drive mounted on the desktop.

You can also set your Mac to show external hard drives in Finder. Go to Finder > Preferences > Sidebar and make sure the 'External disks' option under 'Locations' is ticked.

Solution 4: Check if the external hard drive is NTFS formatted.

NTFS (New Technology File System) is a proprietary file system developed by Microsoft. However, for some reasons, macOS comes with read-only support for NTFS; its disabled-by-default write support for NTFS is unstable. Even though the NTFS formatted external hard drive can show up in Disk Utility, external hard drives might not be mounting as normal.

You can go to Disk Utility and check the file system of the external hard drive is NTFS or not, if this is the case, you can back up the files on the NTFS external hard drive and format it to Mac supported file systems (APFS, HFS+ or HFS) or file systems supported by both Windows and Mac, like FAT32 and exFAT.

Nevertheless, the best phenomenon is that you can read and write NTFS both on Macs and on Windows without fuss. So, a good NTFS for Mac application will enable you to write NTFS external hard drives on macOS without reformatting.

Solution 5: Check if the external hard drive is mountable in Disk Utility.

Seagate External Hard Drive Not Working

You can check if your external hard drive is mounting in Disk Utility. If your external hard drive appears there but is not mounted, you can click the Mount icon then the external hard drive will be mounted in macOS Catalina/Mojave.

However, if the external hard drive appears in Disk Utility but is unmountable or no volumes of that external drive listed, you got both good news and bad news. Good news is that showing the external hard drive in Disk Utility means the drive has no hardware problem, while the bad news is that the file system of this drive probably is corrupted.

But don't worry, macOS has a built-in repair tool, called First Aid, to fix minor disk errors. You can try to fix the external hard drive not mounting issue with this useful program. Just go to Utilities > Disk Utility and click First Aid.

Solution 6: Fix the unmountable external hard drive with Terminal.

If your external hard drive can't be recognized by your Mac and First Aid failed to repair it, you can try to remount via Terminal by following the steps carefully as below:

1. Go to Applications > Utility > Terminal.

Seagate Drive Not Mounting Mac Pro

2. Type in diskutil list. Look for the section labeled /dev/disk_ (external, physical), remember the disk number.

3. Type indiskutil info disk_. Replace '_' with your external disk number. This is to check if your system recognizes this drive.

4. Once confirmed, type in diskutil eject disk_ to eject the external drive.

5. Physically remove the external drive and then re-plug it. Hopefully, your external hard drive will be mounted in macOS Catalina/Mojave.

Solution 7: Check if the external hard drive is corrupted.

If unfortunately, none of the above solutions worked, it's very likely that the files system of the external hard drive is corrupted or damaged too seriously to be recognized by macOS Catalina/Mojave. It could be the result of file system broken, virus attacks, improper ejection, etc. And if you have no important files on this drive, you can directly assign a new file system for this external hard drive by reformatting.

• How to format external hard drives on Mac?

Solution 8: Recover lost data and reformat the unmountable external hard drive.

But what if you have invaluable data that you don't want to lose on this inaccessible external hard drive? In this case, recovering data from this drive with professional data recovery software, such asiBoysoft Mac Data Recovery, would be your access to this unmountable external hard drive.

iBoysoft Data Recovery for Mac is able to recover lost data fromnot mounted external hard drives in macOS Monterey/Big Sur/Catalina/Mojave/High Sierra,recover lost data from corrupted external APFS drives,recover lost data from unreadable external hard drives,recover deleted/lost data from APFS drives, and recover lost data from formatted APFS files, etc.

Step 1: Download and install iBoysoft Data Recovery for Mac on Mac.

Step 2: Launch this program. Select the unmountable hard drive and click 'Next'. The program will start scanning this drive for lost files.

Step 3: After the scanning process finishes, you can double click the found files and preview them.

Seagate Not Working On Mac

Step 4: Choose what you want to get back and click 'Recover'.

Step 5: Go through the recovered files and make sure your desired files are recovered from this external hard drive successfully.

Seagate Not Showing Up Windows 10

If, unfortunately, your data lost from external hard drive in macOS Catalina/Mojave, whether the disk was formatted accidentally or files were deleted mistakenly, you can recover lost data from unmountable hard drive with iBoysoft Data Recovery for Mac. But compared with data recovery software, the best way to escape from data loss is to back up your files on a regular basis.

Read more about Mounting a disk

Seagate Criptografia Problemas Hd Mac

Mounting a hard disk makes it accessible by the computer. This is a software process that 'activates' the disk, which makes the folders and files on the disk readable by the computer. If a hard drive is physically connected, but not mounted, the computer will not recognize it.

Seagate Drive Not Mounting Mac Hard Drive

Even though most operating systems, such as macOS, will mount newly connected disks by default, you still can't avoid accidental problems in that the hard drive is connected through devices like cable, USB port, etc. To fix external hard drive not mounting issue, you need to exclude the errors one by one, and to avoid external hard drive not mounting on macOS Catalina/Mojave, remember to safely unmount the external disk before ejection to avoid possible file data corruption.

Still have questions?