Aux Mic Driver For Mac

A how-to guide for getting your headphone jack to work for your setup.

One might think that using a headset on a computer is as simple as plugging it in. And sometimes it is when you know what type of plug and socket you’re dealing with. But what happens when you’re working with a headset that has two plugs and a laptop with only one jack, or vice versa?

How do you plug a headset mic to a device with only one port?

To the uninitiated, all this can be very confusing. So, to save you from all this, we’ve put together a quick guide to help you work smoothly with your headset. Regardless of the number of plugs or ports you’re dealing with, or whether you’re using newer or older device models, we’ve got you covered.

In This Article

But first, let’s begin with the basics.

What Are TS, TRS, and TRRS?

Not sure if people are still having a problem with this as it's been almost a year, but I was running into this problem with my Mac mini 2014 with Windows 10 Home and Bootcamp v6.0. The sound card is Cirrus Logic CS4208 (AB 108), and I couldn't get Windows to recognize the mic on my headset which was designed for iPhone/Apple usage.

These letters refer to the different connector types or plugs that transmit audio signals between devices. They’re at the end of every single pair of headphones or earphones you’ve ever owned, and on the wires that you plug into your phone, speakers, laptops when you want to listen to something.

The ‘T’ stands for ‘tip,’ the ‘S’ for ‘sleeve,’ and the ‘R’ for ‘ring.’

Each contact point transmits a specific audio signal, while the sleeve acts as the return path and the ground.

A TS plug has one tip (T), one sleeve (S), and no rings. Because it only has two contact points, it’s primarily used for unbalanced mono signals or signals that originate from one audio channel. TS plugs are commonly used for hooking up a guitar to an amp or audio interface.

To learn more about balanced and unbalanced signals, you can check out our detailed write-up about it here.

A TRS plug consists of one tip (T), a ring (R), and a sleeve (S), and is easily identifiable by the two black bands around it. TRS plugs have three contacts designed to transmit stereo or balanced signals. The tip transmits the left audio output, while the ring transmits the right audio output.

TRS plugs come in different sizes ranging from 6.35mm to 2.5mm, the most familiar being the 3.5mm plug, which is commonly used for headphones.

The TRS-type plug can only be used for either microphone input or stereo audio input, and not both. This is why it’s common for headphones that use this type of plug to come outfitted with two, sometimes colored pink and green, to distinguish between audio and microphone input.

A TRRS plug has one tip (T), two rings (RR), and a sleeve (S) and is identifiable by its three black bands. This type of plug has four contacts that transmit the signals for stereo audio, microphone, and video.

This type of plug is commonly used on smartphones, camcorders, tablets, and other similar smart devices with a built-in jack designed to support both stereo audio and microphone simultaneously.

For a more in-depth look into the different kinds of plug configurations and how they work, check out this article: Headphone Jack and Plugs: Everything You Need to Know.

Why is this good to know?

Understanding the functions and differences between TS, TRS, and TRRS plugs is a step towards understanding how well they work with other socket types. Most of us may think that all audio jacks are the same and that you can simply use any audio plug with any jack. However, doing so can affect sound quality and can potentially damage your device.

Here are some compatibility guidelines for TS, TRS, and TRRS plugs:

  • Substituting TRS with TS: Using a TS cable in a TRS socket is not advisable because the audio channel typically associated with the extra ring on the TRS plug will be grounded. As a result, you’ll lose one audio channel and get reduced audio output because the TS plug doesn’t support stereo sound the way a TRS plug does.
  • Substituting TS with TRS: If you try using a balanced TRS plug for unbalanced signal input and output, you’ll still get an unbalanced signal as a result.
  • Substituting TRS with TRRS: It’s typically possible to use a TRRS plug in place of a TRS plug, but because a TRS socket lacks an extra ring, this connection will only retain the audio signal and not the microphone.

How to Use a Headset Mic on PC With Only One Jack

Most computers and laptops nowadays come with a single audio jack designed for both headphones and microphone use. This usually isn’t an issue considering that most wired headphones come with the standard 3.5mm TRRS plug ideal for integrated audio jacks.

But what happens when your headset plug doesn’t match the jack on your laptop or if your headset only has one plug to your computers’ two jacks? Well, this is where those handy little adaptors are needed.

Here are some of our favorites:

Kingtop 3.5mm Combo Audio Adapter

Headphone And Mic Aux

If you’re working with only one jack, the Kingtop 3.5mm Combo Audio Adapter is a good choice. It features two 3.5mm TRS jacks and one 3.5mm TRRS plug. It’s designed to connect older audio devices with separate audio and microphone plugs to newer computers or gaming consoles that only have one integrated audio jack.

The adaptor works for PCs, tablets, external microphones, speakers, smartphones, and popular gaming consoles like the XBOX One and PS4. It does not work, however, for most Apple devices and standard Apple earphones.

Aux Mic Driver For Mac

MillSO Headset Splitter Adapter

The MillSO Headset Splitter Adapter features one TRRS jack and two separate TRS plugs for audio and microphone. So if you have a headset with a single TRRS plug and a computer with two separate microphone and headphone jacks, this adaptor will allow you to seamlessly connect the two, making it great for online gaming and video conferencing.

TechRise USB External Stereo Sound Adapter

The TechRise USB External Stereo Sound Adapter is a 3-in-1 adapter with a dedicated 3.5mm TRS jacks for an external microphone, a gaming headset, and standard audio headphones. It can be connected to a computer via USB and doesn’t require the installation of extra drivers. It also has dedicated mute buttons for both the mic and headphones and a separate volume dial.

This adaptor works on all major operating systems like Windows, Linux, and Mac OS.

How to Use Your Headphones as Mic for PC

In some cases, using your headphones and headphone mic simultaneously isn’t as simple as just plugging the device into your computer.

Here are a few PC Settings tweaks you can do if your headphones are plugged in properly, but you still can’t use the mic:

  1. With your headset plugged into the microphone jack, open ‘Settings’ from the Windows menu located at the bottom leftmost side of the screen.
  2. In the ‘Settings’ window, click ‘System’.
  3. In the new window that pops up, select ‘Sound’ from the left sidebar.
  4. In the ‘Sound’ options that appear on the right side of the window, look for ‘Input’. Make sure your device is selected in the box under ‘Choose your input device’ so that it becomes the default input device.
  5. If you want to test your microphone’s response and adjust the volume settings, click on ‘Device Properties’.
  6. You can easily adjust the volume and test if your microphone responds in the’ Device Properties’ window.

How to Use Your Headphones as Mic for Mac

To set up your headset so that it can use the headphone jack as a microphone for Mac, simply follow these steps:

  1. With your headset plugged into the headphones jack, open System Preferences from the Dock, or click the Apple icon on the upper leftmost corner of your screen.
  2. In the System Preferences window, click the ‘Sound’ icon.
  3. In the ‘Sound’ window, click the ‘Input’ tab. Your headset should be visible in the ‘Select a device for sound input’ section. Make sure to select your chosen input device.
  4. Once that’s done, you can toggle your chosen device’s input volume to make it either highly sensitive to audio input or not, depending on how loud or weak your audio source is. To test if your mic is receiving sound input, you can simply check if the gray bars next to ‘Input Level’ react when you speak into the mic.

Issues That May Arise and How to Address Them

If you’ve completed the above steps and you’re still unable to use your headphones as a mic, check to see if you’ve got the following issues:

Incorrect configuration

If your headset isn’t working, it could merely be a matter of not selecting the proper audio input device in the ‘Sound’ settings.

To check if you have the correct device set to default, just go to the Control Panel, click the ‘Sound’ icon, and select the ‘Recording’ tab in the small pop-up window. Your device should be marked with a green check, and the green bar to the right should be rising as it detects sound.

Wrong connection

A non-functioning headset or microphone may simply be caused by using the wrong port. The good thing is that most ports on PCs are color-coded to avoid these mistakes.

Driver issue

Another cause for a non-functioning headset could be due to driver error. Your sound drivers may be either outdated or incompatible, and as such, you won’t be able to use your headset with your computer correctly.

One way to address this is through the Device Manager. Just open the Control Panel and select ‘Device Manager.’ In the small pop-up window that opens, click ‘Sound, video, and game controllers.’ Select your device from the list and right-click it. In the menu that opens, you can either choose to update your driver or reinstall in by selecting ‘Scan for hardware changes.’

Headphone problem

If all else fails, check to see if there are any physical issues with your headset. If none of the above steps has fixed your headset problem, the device itself may be defective.


It’s certainly good to know that if you’re having headset-related audio problems, there are several ways to go about to fix them. Whether it’s by tweaking a few settings on your computer or simply buying an adaptor to handle the problem conveniently, we hope our guide has helped you fix the issue with minimal frustration and inconvenience.

Do you have your own tips and tricks you’d like to share on the topic? Or do you think we missed out on some important ones? We’d love to hear your thoughts, so feel free to sound off in the comments.

General questions

WO Mic Device driver

Connection questions

Audio quality

3rd party programs


What programs can I use WO Mic device? Can I use it with Skype, recording tool, or voice recognition tools?
Yes, you can. You can use it with any programs that work with real mic device. You can set WO Mic device to be the default recording device for those programs that don't allow you to choose recording device.
Windows prompts missing DLL error when when I try to launch WO Mic client. How to solve it?
Install VC runtime re-distributable (x86) from Microsoft.
WO Mic supports 48000 sampling rate, mono channel and 16 bits per sample.
No, it does not.
Yes, it does. It supports Windows and Linux.
Can I connect multiple phones to PC at same time?
No, you cannot do that with WO Mic. Only 1 connection is allowed.
I cannot find WO Mic audio device. How can I know if the device driver has been installed successfully?
Open WO Mic client and select Help ->Statistics. In the panel, if driver is working well, it should show like Driver state: 1; otherwise, it shall show Driver state: 0.
When you remove WO Mic (either by running WO Mic uninstall.exe or by selecting to remove WO Mic in Windows Settings), WO Mic driver will be removed automatically. If it fails, follow below steps to remove WO Mic driver manually.
  1. Press Windows + X
  2. Select Device manager in the popup menu
  3. Click on Sound, video and game controller
  4. Right click on WO Mic Device and select Uninstall
Why it cannot connect successfully when I'm using Wi-Fi? It's OK with Bluetooth.
For Wi-Fi, TCP port (outgoing from PC. Default is 8125) and UDP port (incoming to PC, default is 30000) are being used. Make sure your firewall on PC does not block these ports.
The control port (TCP port) should be same on phone and PC. The media port (UDP port) can only be configured on PC and will be synchronized to phone during connection establishment.
Go to Settings ->Developer options. Check USB Debugging.

Mic To Aux Adapter

Please note:
  • On most devices running Android 3.2 or older, you can find the option in Settings > Applications > Development.
  • On Android 4.2 and newer, Developer options is hidden by default. To make it available, go to Settings > About phone and tap Build number seven times. Return to the previous screen to find Developer options.
Mic to aux adapter
How can I install USB driver for my Android phone to use USB transport?
Please refer to these pages on how to install USB driver:
  • Google USB driver install guide:
  • Check if ADB driver has been installed correctly:
  • ADB driver software download:
If everything is ok, once you connect phone to your PC by USB cable, your phone should be listed in 'ADB Interface' in Device Manager:
Does this also happen if your laptop display keeps ON? If it does not, please check your computer power options, to ensure that Wi-Fi connection will not be terminated when system enters sleep. Network adapter driver should also be updated to latest one and configured correctly.
There is serious noise like static current. How to avoid it?
Some audio source may be too sensitive to environment noise. Please go to app settings, select different MIC device as audio source and check which is the right one.
This may be caused by different reasons. Here are some tips for your reference:
  • Use USB connection if possible. It's more robust than wireless connection. And its latency is lower.
  • Put WO Mic app into foreground. Android will always give high priority to foreground app to run.
  • Close other apps which may consume too much CPU. WO Mic needs enough CPU duty to do audio packet encoding and transmission.
  • Bluetooth and Wi-Fi are both using 2.4G ISM frequency. They may interfere each other seriously. If it's allowed, while you are using one wireless, you better shut down the other. Please do this on both phone and PC.
WO Mic device is not listed in Skype. How can I use it with Skype?
In Skype audio device setting, select 'Custom device' as audio device. Then Skype allows you to customize microphone and speaker devices separately. Select WO Mic as the microphone device.

Usb Mic To Aux

  • Android phone: Launch Google Play Store app. Tap Menu ->My Apps ->Subscriptions. Then tap on WO Mic to cancel its subscription.
  • iPhone: Refer to this page:

Aux Mic Driver